Payment & Shipping Terms:
|Purity:||99.95%(3N5) - 99.99%(4N)||Manufacturing Standard:||ASTM B708-05|
|Appearance:||Silvery-gray Solid, Bright And Clean||Density:||Highest Possible|
|Boiling Point:||5425℃||Melting Point:||2996 ℃|
|Property:||Heat-resistant, Corrosion Resistant||Application:||Semiconductor, Optics, Aerospace, Medical Treatment, Military, Coating Material.|
|Thermal Conductivity:||0.575 W/cm/K @ 298.2 K||Shape:||Plate, Sheet, Strip, Foil|
99.95%(3N5) Purity Tantalum Plate , Size Tailored , ASTM B708-05 International Standard
Application: Tantalum plate can be used in chemistry instrument, Cathodic protection system for steel structure such as bridges, water tanks, it is also used in medical to produce artificial limbs and stiching instruments, corrosion resistant fasteners, bolts, nuts, high temperature furnace components, high temperature aluminum alloy for aviation and roadbed turbine.
Dimension:Tailored upon requests
Manufacturing standard: ASTM B708-05, GB/T 3629-2006
Metallic impurities, ppm max by weight, Balance - Tantalum
Non-Metallic impurities, ppm max by weight
Mechanical properties for annealed plate and sheet (Annealed)
|Ultimate Tensile Strength (MPa)||207||172|
|Yield strength (Mpa, 2% offeset)||138||103|
|Elongation(%, 1-in gage length)||20||30|
Tantalum is dense, ductile, very hard, easily fabricated, and highly conductive of heat and electricity and is featured the third highest melting point 2996℃ and high boiling point 5425℃. It has the characteristics of high temperature resistance, high corrosion resistance, cold machining and good welding performance. Therefore, tantalum and its alloy are widely used in electronics, semiconductor, chemical, engineering, aviation, aerospace, medical, military industry etc. The application of tantalum will be more and more widely used in more industry with the technology progress and innovation. It can be found in cell phones, laptops, game systems, automotive electronics, light bulbs, satellite components and MRI machines.
The tantalum plate, sheet, strip and foil surface should be smooth, clean, greaseless, without fissure or burr, no mess around, no knotting, no crossover, no continuous pitches or scratches. Most foils are produced from cast ingots which are used in coating and thin film.
Towin Rare Metals produce RO5200, RO5400 with different dimensions of the tantalum plates, tantalum sheets and tantalum foils. Moreover, we guarantee the tantalum purity is between 99.9% to 99.95% or higher. We also make sure of excellent properties performance. The size can be tailored by the customers’ requirements. We control our products quality through the raw material source till the whole production line and finally deliver to our customers in order to make sure you purchase our products with stable and same quality each lot.
Contact Person: sales